What is an open architecture-expensive machines,personal tool

The concept of personal computer is similar to that of other computers. What is the most important? It must be able to afford high costs. We have to keep producing expensive machines, and in the process of making machines, the costs are high. Only when a machine can truly afford these high costs can we call it a real personal tool. Second, there is ease of use after the purchase, after which. There are also important aspects of individual fpc1 that are easy to move, easy to learn, easy to use, and easy to maintain.

The ability of fpc1 processing can be immediately obtained by individual fpc1. This has added to the work of engineers, inventors, technicians, amateurs, educators and anyone who needs to make things. If the cost of the machine tool is a standard small fpc2 (vertical machining center) 1/5 of this kind of situation, then, a machining class of each student, they can achieve their running, and don’t need to queue, it is can’t think of before. Both in the process of research and development, and in the process of prototyping, a few minutes of time are needed, the machine “ready” and the scene, there is no need for a few minutes. In general engineering, because the design engineers are more direct in the creation of the prototype, we have been greatly improved in the design of production.

What is an open architecture?

In the hyperbole of marketing, the term “open architecture” has been abused, so the result now is that it becomes meaningless. However, we can see that the design concept behind this term is very important. The fully open architecture has not been proposed by us, but rather simple things have been provided, and what our machine architecture looks like.

We want to know, what does open architecture mean to us?

What is the main shaft and the driving system-spindle motor, drilling machine

In terms of the design of the spindle lock, we can see that it is much simpler, and for the spindle itself, it is hard, and the cost of the machine is lower. The KISS principle is here. For fpc1, there is only one way to move: the whole head is moving. If you really want to do this, then you need to buy a drilling machine or go to Las Vegas to play slot machines.

What is the main shaft and the driving system?

The main shaft drive system consists of the spindle motor, the transmission system and the main shaft itself. These parts are designed to be interrelated, so it is best to design them as systems.

Induction motor, servo motor, and dc brush motor are all considered when we are deciding the motor. Considerable complexity and cost have been increased by Servos and their electronic drivers. Our electric brush motor also has problems, the problem is the maintenance problem, in the induction motor, there is almost no standardization here. In terms of value, simplicity, and longevity, fpc6 is definitely the best solution.

Whether to include unlimited speed is another important decision we face. With the development of cheap fpc7 (variable frequency drive), we can see that the complexity of mechanical transmission is no longer reasonable as a solution. In the 1960s, it was mechanical drives that played a big role in fpc6 machines, but they were also common as a point of failure. Solid-state electronics are characterized by low cost and high reliability, rather than mechanical alternatives to infinite resolution speed control.

What is modularity-drill/mill,machine tool

What is modularity? — sales of fpc1

Fpc2 is widely used in various applications. Although, most of the basic machine tools can be designed to meet the demand, the details, such as the type of coolant and shell style that can’t be satisfied because they need to be more variable. Open machines like drill/mill or Bridgeport are used by some applications, while others are more suitable for closed machining centers.

What determines the variability of the application? It is determined by another dimension, “make” and “buy”. Though for small shopkeepers, want to let them make their own machine tools, this sounds very unrealistic, but, for a user, can achieve is to build a small machine tool a booth or shell.

In order for the widest community to be satisfied, we have also made a decision that machines, stands and fences, and other accessories can be provided as discrete projects. Here, all of your stuff is available: but you only need to buy what you really need.

What is the frame?

As we all know, light vertical fpc1 and fpc2 are the most common machine designs. What is a kneecap factory? It is usually a manual workshop: the general standard is Bridgeport’s design. Because of the design, the Z movement was forced to make a decision, which is very difficult, and fpc5 is different from fpc1 because it is not so common. The designer provides computer manipulation. It can be done on a knee or a feather pen. When the knee is moving, it will greatly increase the cost of the control system, because it involves quality problems. The X and Y motion systems need to be moved by it, including the whole table, the tool fixture, and the working parts themselves. When a feather pen is moved, the range of motion is strictly limited, usually about 6 inches or less. If the feather pen is designed for longer, the mechanical rigidity will be lost to the system.